Suncor Stainless Product Information Knowledgebase
Search:     Advanced search
Browse by category:
Knowledgebase | Downloads | Glossary | Ask a Question |

Trailer Safety Checklist

Article ID: 54
Last updated: 22 May, 2012
Add comment
Views: 2333
Comments: 0

Trailer Safety Checklist

  1. The coupler securely engages your hitch.  The coupler and hitch ball must be rated for the same size.  The size should be imprinted on both the ball and the hitch.
  2. Safety chains are safely secured to trailer and tow vehicle in a criss-cross fashion under the tongue.
  3. Jack is fully cranked up (and parallel to tongue if swivel jack).
  4. Boat is securely tied down with tie-down straps.  Your winch strap is not a tie-down strap.  A winch controls your boat in a horizontal direction.  Tie-downs control your boat in the vertical direction.  You must have bow-ey and transom tie down straps securely attached whenever the trailer is in use.
  5. All fasteners/bolts are properly tightened.  Pay particular attention to the lug nuts.
  6. Tires are properly inflated (read the tire sidewall to determine the correct tire pressure required).  This rating will be different than your tow vehicle.  Also, check for tire wear, cracks, bubbles or foreign objects imbedded in the tire.
  7. Brake lights and other trailer lights are working.
  8. If the trailer is equipped with brakes, make sure they are functioning by lightly testing before getting on a major road.
  9. If the trailer is equipped with brakes, connect the breakaway cable (located on top of acuator) to the tow vehicle.
This article was:  
Add comment
Prev   Next
Ratchet Assembly Instructions     Anchor Weight Guide

Others in this category
document BILT App
document Fastener Matching for Suncor Parts
document Backing Plates
document Sail Boat Diagram
document Cleat Question and Answer
» More articles