Material: Stainless Steel
These stainless steel swage fittings meet mil. spec #MS20663. They have met all quality and testing requirements per MIL-DTL-781 and are approved for listing in QPL-781. The double shank ball is offered in a variety of sizes, ranging from 1/16" to 5/16".
ITEM |
A (wire) |
B BEFORE (swage) |
B AFTER (swage) |
C BEFORE (swage) |
C AFTER (swage) |
D |
WT (lb) |
---|---|---|---|---|---|---|---|
MS20663C2 | 1/16" | 0.127" | 0.112" | 0.207" | 0.190" | 0.36" | 0.001 |
MS20663C3 | 3/32" | 0.163" | 0.143" | 0.277" | 0.253" | 0.53" | 0.003 |
MS20663C4 | 1/8" | 0.218" | 0.190" | 0.345" | 0.315" | 0.69" | 0.01 |
MS20663C5 | 5/32" | 0.254" | 0.222" | 0.419" | 0.379" | 0.85" | 0.01 |
MS20663C6 | 3/16" | 0.293" | 0.255" | 0.487" | 0.442" | 1.01" | 0.02 |
MS20663C7 | 7/32" | 0.347" | 0.302" | 0.555" | 0.505" | 1.18" | 0.03 |
MS20663C8 | 1/4" | 0.401" | 0.348" | 0.624" | 0.567" | 1.34" | 0.04 |
MS20663C10 | 5/16" | 0.475" | 0.413" | 0.763" | 0.694" | 1.66" | 0.07 |
If you have questions about this product or any of our products, please visit our knowledgebase for further assistance. If you don't find an answer, you can always submit a product question.
Product Information & Support