Material: Stainless Steel
These stainless steel swage fittings meet mil. spec #MS20668. They have met all quality and testing requirements per MIL-DTL-781 and are approved for listing in QPL-781. The swage eye is offered in a variety of sizes, ranging from 1/16" to 3/8".
ITEM |
A (wire) |
B | C | D |
BEFORE (swage) |
AFTER (swage) |
WT (lb) |
---|---|---|---|---|---|---|---|
MS20668-2 | 1/16" | 0.09" | 0.19" | 1.63" | 0.160" | 0.138" | 0.01 |
MS20668-3 | 3/32" | 0.10" | 0.19" | 2.04" | 0.218" | 0.190" | 0.02 |
MS20668-4 | 1/8" | 0.19" | 0.19" | 2.34" | 0.250" | 0.219" | 0.03 |
MS20668-5 | 5/32" | 0.20" | 0.25" | 2.68" | 0.297" | 0.250" | 0.05 |
MS20668-6 | 3/16" | 0.26" | 0.31" | 3.02" | 0.359" | 0.313" | 0.09 |
MS20668-8 | 1/4" | 0.31" | 0.38" | 3.76" | 0.494" | 0.438" | 0.19 |
MS20668-10 | 5/16" | 0.34" | 0.44" | 4.55" | 0.635" | 0.563" | 0.37 |
MS20668-12 | 3/8" | 0.38" | 0.50" | 5.56" | 0.703" | 0.625" | 0.58 |
If you have questions about this product or any of our products, please visit our knowledgebase for further assistance. If you don't find an answer, you can always submit a product question.
Product Information & Support