Material: Stainless Steel
These stainless steel swage fittings meet mil. spec #MS20667. They have met all quality and testing requirements per MIL-DTL-781 and are approved for listing in QPL-781. The swage fork is offered in a variety of sizes, ranging from 1/16" to 3/8".
ITEM |
A (wire) |
B | C | D |
BEFORE (swage) |
AFTER (swage) |
WT (lb) |
---|---|---|---|---|---|---|---|
MS20667-2 | 1/16" | 0.09" | 0.19" | 1.57" | 0.160" | 0.138" | 0.01 |
MS20667-3 | 3/32" | 0.11" | 0.19" | 1.95" | 0.218" | 0.190" | 0.02 |
MS20667-4 | 1/8" | 0.20" | 0.19" | 2.35" | 0.250" | 0.219" | 0.03 |
MS20667-5 | 5/32" | 0.20" | 0.25" | 2.67" | 0.297" | 0.250" | 0.04 |
MS20667-6 | 3/16" | 0.26" | 0.31" | 3.07" | 0.359" | 0.313" | 0.09 |
MS20667-8 | 1/4" | 0.31" | 0.38" | 3.81" | 0.494" | 0.438" | 0.21 |
MS20667-10 | 5/16" | 0.35" | 0.44" | 4.44" | 0.635" | 0.563" | 0.40 |
MS20667-12 | 3/8" | 0.38" | 0.50" | 5.33" | 0.703" | 0.625" | 0.58 |
If you have questions about this product or any of our products, please visit our knowledgebase for further assistance. If you don't find an answer, you can always submit a product question.
Product Information & Support