Mil. Spec Swage Stud

Material: Stainless Steel

UNF Thread

These stainless steel swage fittings meet mil. spec #MS21259. They have met all quality and testing requirements per MIL-DTL-781 and are approved for listing in QPL-781. The swage stud is left and right hand UNF thread and offered in a variety of sizes, ranging from 1/16" to 3/8".

Mil. Spec Swage Stud Line Drawing

ITEM A
(wire)
B
(thread)
C D E
(wrench flat)
WT
(lb)
RIGHT HAND, UNF
MS21259-2RH  1/16"  0.14" 1.05" 2.47" 0.16" 0.01
MS21259-3RH  3/32"  0.19"  1.20"  2.88"  0.19" 0.02
MS21259-4RH  1/8"  0.25"  1.38"  3.33"  0.25" 0.04
MS21259-5RH  5/32"  0.25"  1.38"  3.63"  0.25" 0.05
MS21259-6RH  3/16"  0.31"  1.45"  4.00"  0.31" 0.08
MS21259-8RH  1/4"  0.38"  1.75"  4.94"  0.44" 0.17
MS21259-10RH  5/16"  0.50" 2.00" 5.84" 0.63" 0.38
MS21259-12RH  3/8"  0.56" 2.25" 6.66" 0.69" 0.50
LEFT HAND, UNF
MS21259-2LH 1/16"   0.14"  1.05"  2.47"  0.16" 0.01
MS21259-3LH  3/32"  0.19"  1.20"  2.88"  0.19" 0.02
MS21259-4LH  1/8"  0.25"  1.38"  3.33"  0.25" 0.04
MS21259-5LH  5/32"  0.25"  1.38"  3.63"  0.25" 0.05
MS21259-6LH  3/16"  0.31"  1.45"  4.00"  0.31" 0.08
MS21259-8LH  1/4"  0.38"  1.75"  4.94"  0.44" 0.17
MS21259-10LH  5/16"  0.50"  2.00"  5.84"  0.63" 0.38
MS21259-12LH  3/8"  0.56"  2.25"  6.66"  0.69" 0.50

If you have questions about this product or any of our products, please visit our knowledgebase for further assistance. If you don't find an answer, you can always submit a product question.

Product Information & Support

Related Products

These stainless steel swage fittings meet mil. spec #MS20664C. They have met all quality and…

Material: Stainless Steel

The Mil. Spec Special Eye is available to fit a 3/16" wire rope. These swage terminals meet all…

Material: Stainless Steel

These stainless steel swage fittings meet mil. spec #MS20668. They have met all quality and…

Material: Stainless Steel

These stainless steel swage fittings meet mil. spec #MS20667. They have met all quality and…

Material: Stainless Steel