Swage Marine Eye

Grade: 316 Stainless Steel

The Swage Marine Eye can fit wire sizes ranging from 1/16" to 1/2" to fit every project, large or small. This swage eye is made from grade 316 stainless steel for maximum corrosion resistance and durability. It is ideal for marine rigging and lifeline applications.

Swage Marine Eye Line Drawing

ITEM A
(wire)
B C D BEFORE
(swage)
AFTER
(swage)
WT
(lb)
S0735-0001 1/16" 0.22" 0.26" 1.50" 0.160" 0.138" 0.03
S0735-0002 3/32" 0.22" 0.26" 1.76" 0.218" 0.190" 0.03
S0735-0003 1/8" 0.22" 0.26" 2.09" 0.250" 0.219" 0.04
S0735-0004 5/32" 0.28" 0.33" 2.36" 0.297" 0.250" 0.05
S0735-0005 3/16" 0.36" 0.39" 2.75" 0.359" 0.313" 0.09
S0735-0006 7/32" 0.41" 0.45" 3.22" 0.427" 0.375" 0.16
S0735-0007 1/4" 0.47" 0.51" 3.63" 0.494" 0.438" 0.23
S0735-0008 9/32" 0.47" 0.51" 3.80" 0.563" 0.500" 0.28
S0735-0009 5/16" 0.59" 0.64" 4.50" 0.635" 0.563" 0.45
S0735-0010 3/8" 0.59" 0.64" 4.93" 0.703" 0.625" 0.62
S0735-0013 1/2" 0.84" 0.89" 7.38" 0.844" 0.750" 1.14

If you have questions about this product or any of our products, please visit our knowledgebase for further assistance. If you don't find an answer, you can always submit a product question.

Product Information & Support

Related Products

The Mil. Spec Special Eye is available to fit a 3/16" wire rope. These swage terminals meet all…

Material: Stainless Steel

These stainless steel swage fittings meet mil. spec #MS20668. They have met all quality and…

Material: Stainless Steel

The Swage Eye can fit wire sizes ranging from 1/16" to 1/2" to fit every project, large or small…

Grade: 316 Stainless Steel

The Swage Marine Jaw can fit wire sizes ranging from 1/16" to 1/2" to fit every project, large or…

Grade: 316 Stainless Steel